- #Diskkeeper turn off active drivers
- #Diskkeeper turn off active driver
- #Diskkeeper turn off active Pc
- #Diskkeeper turn off active windows
Run the Hardware and Devices Troubleshooter If not or the Power Mode is already set to Balanced, check if changing the Power Mode to High Performance solves the problem.ģ.
Change the System’s Power Mode to Balanced or High Performance Then change the dropdown of the Power Mode to Balanced and check if the issue is resolved.Now, in the left pane, head to the System tab, and in the right pane, open Power & Battery.
#Diskkeeper turn off active windows
Open Windows Settings Through the Quick Access Menu
Right-click Windows and open Settings. In such a case, changing the system’s power mode to Balanced or High Performance may solve the problem. 
If your system is running in the Power Saving mode, then certain features of the system face degradation in the performance to save the system’s power and thus cause freezing. If the issue persists, check if increasing the system’s virtual memory solves the problem. If that did not work and the issue is occurring with an external drive with a cover or caddy, check if trying another cover/caddy or without any cover (if possible) clears the error.
If that fails, check if using another SATA cable to connect the drive to the system resolves the issue. Then power on the system and check if it is clear of the DeviceRapidPort issue. Now put back the PC’s cover and wait for 10 minutes. #Diskkeeper turn off active Pc
Now reseat all the internal components of the PC and reinsert all the cables, especially, the cables of the problematic drive. Then release the PC’s power button and remove the cover of the system. Now press the power button of the system and wait for 30 seconds. Also, make sure to remove any connected devices from the system like a printer, etc. In the case of a laptop, remove its battery. Power off your system and remove its power cable from the power source. Before proceeding, it is strongly recommended that you create a backup of the problematic drive as the error can be one of the first symptoms of a failing hard drive. Here, performing a cold restart of the system and reseating the drive cables as well as other internal components (like RAMs) may solve the problem. Perform a Cold Restart of the System and Reseat the Disk CablesĪ temporary glitch in the system’s modules or an improperly seated cable of the drive could cause the reset to devise issue. Whether the system is in the power saving mode or if the power plan puts the drive under discussion to sleep (if not a system drive) to save the power and thus cause the issue.ġ. Power Plan Settings of the PC: You may also encounter the issue at hand if the power plan settings of the PC are not optimal for the drive operation. #Diskkeeper turn off active driver
Outdated Firmware of the Disk Drive: If the firmware (not the driver) of your disk drive is outdated, then its incompatibility with the OS or storage driver may hinder the OS’s access to the disk device, thus causing the error at hand. Interference from the System’s Antivirus: The “reset to device” error might occur if the system’s antivirus is hindering the read/write operation to the disk. #Diskkeeper turn off active drivers
Outdated PC’s Windows and System Drivers: You may encounter the DeviceRapidPort problem if the system’s Windows or system drivers are outdated as it can make OS or drivers incompatible with each other.Corrupt System Files: If the essential system files are corrupt, then that corruption could lead to the “reset to device” error as certain read/write operations on the drive will fail.
0 kommentar(er)
